Original Xhorse V4.7.8 VVDI2 Commander Car Key Programmer Full Version for VW/Audi/BMW/Porsche/PSA / AUDI
Top 7 Reasons to Get VVDI2:
1. This VVDI2 Full Package Contains Basic Function +For VW +For BMW + For Porsche+For PSA + For AUDI Generation 5 Function + For BMW OBD Fucntion + For BMW CAS4 Functions + For Tango + For J2534
2. VVDI2 Full Package Covers All the Functions of VVDI, VVDI 5th IMMO Adapter, For BMW Multi Tool & CAS Plus for BMW Multi Tool
3. Support For VW, For Audi, For BMW, For Porsche & For PSA
4. Update Online Free Lifetime
5. Latest Version: V5.2.5 VVDI2 V5.2.5 Software Free Download (You can contact us to get the link when you get the package)
6. Newly Add For BMW FEM/BDC and Prepare Dealer Key by ECU Data Function (You can contact us to pay to open the function)
7. If you have iKeycutter CONDOR XC-MINI, we can open the authorization to read pin, cs, mac.
VVDI2 - for BMW FEM/BDC system (function released and available, just no user manual)
Users can refer to following information (3 steps for make keys:get key info->programming FEM/BDC system->make keys)
1.support make new key with ignition switch(support add spare key and all key lost, all key lost require ISN)
2.support reset FEM/BDC KM(cluster require reset manually)
3.support erase key(after erase the key position become blank position)
4.support backup coding
5.support restore coding
Notes:
1.backup coding and restore coding can direct operation generally.
2.add keys, reset KM, erase key must programming FEM/BDC system first.
3.in FEM/BDC interface, if 'get key info' the type not support, it will show:customer should use "for BMW E-sys software" program FEM/BDC system.then programming FEM/BDC system with VVDI2-for BMW.
4.when operation on 'programming FEM/BDC system'interface,please don't close this software window until all procedures completed.
5.programming FEM/BDC system, require soldering and get eeprom.(FEM 95128 chip, BDC 95256 chip)usually there are 2 same chips on the module, please refer to the software diagram, select the correct one.
6.programming FEM/BDC system,must restore the original eeprom, restore coding.if cannot restore coding or after restore coding assemble FEM/BDC module back to car,but with problem(such as the remote control cannot start the car
or the car with window problem)please use "for BMW E-sys software" coding for FEM/BDC system
7.if connect power to FEM/BDC module, but the relay keep ringing,please contact technical support for help.usually operation on FEM/BDC should be ok,just need to programming.
Contact information:
Name: Lisa
Whatsapp: 86-13975180177
Skype: gsliuxiaxia
